PRODUCTS / VERTICAL MACHINING CENTER

Characteristic

Specification

Video

Linear Guide Way

SV-50/65/76

SV-50S/65S/76S

SV-85/105/130

SV-85S/105S/130S

Box Way

VB-120/140

VB-150/170/200

Linear Guide Way | SV-50/65/76

The vertical machining center integrates the features of high speed and maximum stability. The series of machines enhances the structural design to assure the best dynamic and static stability. They are equipped with a 10,000rpm high speed spindle, combined with 48 m/min. rapid traverse rate on three axes making it the most valuable vertical machining center.

PERFECT STRUCTURAL RIGIDITY

The stable low gravity machine base offers a solid foundation for the entire machine. The V-shaped inner ribs provide long lasting dynamic and static accuracy.
Extra wide span between linear ways exhibits exceptional stability to absorb cutting vibration; free from overhang problems.
All structural parts are manufactured from high tensile FC-300 cast iron, stress relieved and deformation free.
The box type construction features anti-deformation and anti-bending.
The A-shaped machine column firmly supports the ATC unit and head stock. The design is capable of dealing with cutting force from axial and radial directions.

10000 rpm Direct-Drive Spindle (Standard)

BT-40 spindle taper
The acceleration / deceleration time for the direct-drive spindle is quickly accomplished in only 1 ~ 1.8 seconds.
This greatly upgrades machining efficiency.
12,000 /15,000 rpm is optional.

Arm Type ATC (Standard)

The tool magazine can be fitted with BT-40 tool shank.
The magazine body is manufactured from aluminum alloy for reducing the inertia load. It also features fast tool change and stable motion.
Random, bi-directional tool selection.
The smooth cam-driven tool change mechanism takes only 1.8 seconds exchange time. (T to T).

ANCHORED BALL SCREWS

Both ends of ball screws are anchored on the machine by angular contact ball bearings, that feature higher rigidity and stability than those made by competitors.
Pretensioned ball screws remove backlash, and increase positioning accuracy.

WIDE INTERIOR SPACE

Wide interior space features good ventilation, efficient chip evacuation. Two coolant flush motors are standard, with the coolant flushing rings inside the chip enclosure that is capable of removing heat source from the machine.
Two independent-controlled pumps respectively for spindle cutting and for chip enclosure’s coolant flush.

CONCEALED PNEUMATIC PARTS

The pneumatic parts are centralized in a compartment to prevent them from bumping, while helping to keep the machine looking neat.

SERVO DRIVE

Increases overall performance to achieve outstanding result of high speed high precision cutting.

Optimized Spindle Head H / L Ratio

Special cooling device for Z-axis bearing housing (Opt.)
Equipped spindle oil cooler. (Opt.)
Cooling device for spindle motor flange.

The ratio between the spindle stock’s height and width is nearly 1:1, allowing it to present superior capabilities in radial and axial cutting resistance.